TM 5-3805-296-23-5
0320
INSTALLATION CONTINUED
NOTE
Install bolts as noted during removal.
3. Install hydraulic tank return tube (Figure 9, Item 4), one washer (Figure 9, Item 6), and bolt (Figure 9, Item 5)
on hydraulic tank (Figure 9, Item 3). Do not tighten bolt at this time.
4. Install two clamp halves (Figure 9, Item 11) on hydraulic tank return tube (Figure 9, Item 4).
5. Install two clamp halves (Figure 9, Item 11), one washer (Figure 9, Item 12), bolt (Figure 9, Item 13), washer
(Figure 9, Item 10), and nut (Figure 9, Item 9) on bracket (Figure 9, Item 8). Do not tighten nut and bolt at this
time.
6. Install three remaining washers (Figure 9, Item 1) and bolts (Figure 9, Item 7) on hydraulic tank
(Figure 9, Item 3). Tighten four bolts (Figure 9, Items 5 and 7) in an alternating pattern.
7. Tighten nut (Figure 9, Item 9) and bolt (Figure 9, Item 13).
Figure 9. Hydraulic Tank Return Tube and Retaining Hardware.
0320