TM 5-3805-296-23-5
0320
REMOVAL CONTINUED
CAUTION
Cap or plug hydraulic tank return tube and hydraulic tank to prevent contamination. Failure
to follow this caution may result in equipment damage.
NOTE
Note size and position of bolts to aid in installation.
26. Remove four bolts (Figure 8, Item 5), washers (Figure 8, Item 1), and hydraulic tank return tube (Figure 8,
Item 4) from hydraulic tank (Figure 8, Item 3).
27. Remove O-ring (Figure 8, Item 2) from hydraulic tank return tube (Figure 8, Item 4). Discard O-ring.
28. Remove hydraulic tank return tube (Figure 8, Item 4) from machine.
Figure 8. Hydraulic Tank Return Tube.
0320
END OF TASK
CLEANING AND INSPECTION
000320
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0539).
END OF TASK
INSTALLATION
000320
NOTE
Remove caps or plugs from hydraulic tank return tube and hydraulic tank.
1. Position hydraulic tank return tube (Figure 9, Item 4) on machine.
2. Install new O-ring (Figure 9, Item 2) on hydraulic tank return tube (Figure 9, Item 4).