TM 5-3805-296-23-5
0320
INSTALLATION CONTINUED
NOTE
Remove plugs or caps from line and hose.
Install line, plate, and hose as tagged and marked during removal.
20. Position hydraulic line (Figure 13, Item 8) on machine.
21. Install new O-ring (Figure 13, Item 11) on plate (Figure 13, Item 1).
22. Loosely install plate (Figure 13, Item 1), lower flange half (Figure 13, Item 9), two washers (Figure 13, Item 2),
and bolts (Figure 13, Item 3) on hydraulic line (Figure 13, Item 8).
23. With assistance, position hydraulic hose (Figure 13, Item 10) on machine.
24. Install new O-ring (Figure 13, Item 7) on hydraulic hose (Figure 13, Item 10).
25. Install hydraulic hose (Figure 13, Item 10), upper flange half (Figure 13, Item 6), two washers
(Figure 13, Item 5), and bolts (Figure 13, Item 4) on hydraulic line (Figure 13, Item 8). Do not tighten bolts at
this time.
Figure 13. Hydraulic Hose and Hydraulic Line.
0320