TM 5-3805-296-23-5
0292
INSTALLATION CONTINUED
9. Install retainer (Figure 20, Item 5), three washers (Figure 20, Item 4), and bolts (Figure 20, Item 3) on ring gear
assembly (Figure 20, Item 6). Tighten bolts to 30 lb-ft (41 Nm).
10. Using assistance, remove two slings (Figure 20, Item 1) and chain hoist (Figure 20, Item 2) from tire and wheel
(Figure 20, Item 7).
NOTE
Alternate between rotating wheel and tightening bolts. Rotate wheel at least one
revolution between bolts.
11. While rotating front tire and wheel assembly (Figure 20, Item 7), tighten three bolts (Figure 20, Item 3) to
52 lb-ft (70 Nm).
Figure 20. Retainer.
0292
