TM 5-3805-296-23-2
0147
Table 1. Right Rear Turn/Stop Light Does Not Operate Continued.
0147
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 9. Test Turn Signal Wiring
Right Rear Turn/Stop Light
Harness for High Resistance or
Does Not Operate
Open.
Continued
1. Separate boot (Figure 3, Item 1)
from turn signal switch
(Figure 3, Item 2).
2. Disconnect terminal 539
(Figure 3, Item 4) from
turn signal switch terminal 5
(Figure 3, Item 3).
3. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Replace turn signal switch (WP 0525).
between connector N-C1
Proceed to Test Step 17.
terminal 2 (WP 0012, Figure 264)
Resistance Greater Than 5.0 Ohms
and terminal 539
Replace turn signal wiring harness
(Figure 3, Item 4).
(WP 0525).
Proceed to Test Step 17.
Figure 3. Turn Signal Switch and Wiring Harness.
0147
