TM 5-3805-296-23-2
0147
Table 1. Right Rear Turn/Stop Light Does Not Operate Continued.
0147
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
5. Using digital multimeter
Right Rear Turn/Stop Light
Continuity Replace hitch wiring
(WP 0540), test for continuity
Does Not Operate
harness (WP 0401).
between connector E-C3
Continued
Proceed to Test Step 17.
terminal 23 (WP 0012, Figure 142)
No Continuity Proceed to step 5.
and all other terminals
in connector E-C3
(WP 0012, Figure 142).
6. Using digital multimeter
Continuity Replace hitch wiring
(WP 0540), test for continuity
harness (WP 0401).
between connector E-C3
Proceed to Test Step 17.
terminal 23 (WP 0012, Figure 142)
No Continuity Proceed to Test
and ground.
Step 13.
Test Step 13. Test for Shorted
Chassis Wiring Harness.
1. Disconnect connector J-C8
(WP 0012, Figure 100)
from connector W-C1
(WP 0012, Figure 99).
2. Using digital multimeter
Continuity Replace chassis wiring
(WP 0540), test for continuity
harness (WP 0305).
between connector J-C6
Proceed to Test Step 17.
terminal 23 (WP 0012, Figure 141)
No Continuity Proceed to step 3.
and all other terminals
in connector J-C6
(WP 0012, Figure 141).
3. Using digital multimeter
Continuity Replace chassis wiring
(WP 0540), test for continuity
harness (WP 0305).
between connector J-C8
Proceed to Test Step 17.
terminal 28 (WP 0012, Figure 100)
No Continuity Proceed to step 4.
and all other terminals
in connector J-C8
(WP 0012, Figure 100).
4. Using digital multimeter
Continuity Replace chassis wiring
(WP 0540), test for continuity
harness (WP 0305).
between connector J-C8
Proceed to Test Step 17.
terminal 28 (WP 0012, Figure 100)
No Continuity Proceed to Test
and ground.
Step 14.
0147-11
