TM 5-3805-296-23-2
0104
Table 1. Engine Will Not Crank Continued.
0104
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Engine WIll Not Crank
4. Inspect starter negative cable
Cable OK Proceed to step 5.
Continued
(Figure 12, Item 3) and retaining
Cable Damaged - Replace cable
hardware (Figure 12, Items 1 and
(WP 0311).
4) for damage, and loose and
Proceed to Test Step 27.
corroded connections (WP 0540).
Cable Connection(s) Corroded
Clean IAW (WP 0540) and connect
cable (WP 0311).
Proceed to Test Step 27.
Cable Connection(s) Loose Tighten
cable connection(s).
Proceed to Test Step 27.
5. Disconnect and inspect engine
Wiring OK Proceed to step 6.
interface wiring harness
Starter Wiring Damaged Replace
(Figure 12, Item 5) and starter
left starter (WP 0217) and right starter
wiring (Figure 12, Item 2) for
(WP 0218).
damage, and loose and corroded
Proceed to Test Step 27.
connections (WP 0540).
Engine Interface Wiring Harness
Damaged Replace engine interface
wiring harness (WP 0211).
Proceed to Test Step 27.
6. Position boot aside
Cable OK Proceed to step 7.
(Figure 12, Item 7) and inspect
Cable Damaged Replace cable
starter positive cable
(WP 0310).
(Figure 12, Item 8) for damage,
Proceed to Test Step 27.
and loose and corroded
Cable Connection Corroded
connection (WP 0540).
Disconnect battery positive cable from
battery (WP 0307).
Clean IAW (WP 0540) and connect
cable to starter (WP 0310).
Connect battery positive cable to
battery (WP 0307).
Proceed to Test Step 27.
Cable Connection Loose
Disconnect battery positive cable from
battery (WP 0307).
Tighten cable connection.
Connect battery positive cable to
battery (WP 0307).
Proceed to Test Step 27.
0104-20
