TM 5-3805-296-23-2
0082
Table 1. 1294 Ejector Return Indicator Diagnostic Codes Continued.
082
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
1294-06 Ejector Return Lamp DIAGNOSTIC CODE SET CONDITION
Transmission/Chassis ECM Detects Abnormally High Current on Ejector Return
Current Above Normal
Continued
Lamp Circuit R748 During Lamp Test or Ejector Return Operation.
POSSIBLE CAUSE
Ejector Return LED Shorted.
Dash Wiring Harness Shorted.
Main Cab Wiring Harness Shorted.
Transmission/Chassis ECM.
Test Step 1. Test for Shorted Ejector
Return LED.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Disconnect connector P-C27 from
instrument panel. Remove ejector
return LED from connector
P-C27 (WP 0506) (Figure 3).
3. Disconnect connector P-C26 from
instrument panel. Remove throttle
lock LED from connector P-C26
and install LED on connector
P-C27 (WP 0506) (Figure 3).
Figure 3. Connector P-C26 and Connector P-C27 on Instrument Panel.
0082
