TM 5-3805-296-23-2
0065
Table 1. 0702 Shift Lever Position Sensor Diagnostic Codes Continued.
065
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
0702-08 Transmission Gear
Test Step 11. Verify Malfunction is
Lever Selector Sensor
Resolved.
(Switch) Abnormal Signal
1. Ensure all harness connectors are
Continued
connected.
2. Turn battery disconnect switch to
ON position, start engine, depress
brake pedal, and move gear shift
lever into each gear position
and then back to neutral
(TM 5-3805-296-10).
3. At MSD, check for active
702-8 Transmission Gear Lever
diagnostic codes (WP 0008).
Selector Sensor (Switch) Abnormal
Signal Becomes Inactive Proceed to
step 4.
702-8 Transmission Gear Lever
Selector Sensor (Switch) Abnormal
Signal Remains Active Repeat
troubleshooting from the beginning.
4. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
5. Install right trim panels on ROPS
(WP 0494).
6. Troubleshooting complete
END OF WORK PACKAGE
0065-15/(16 blank)
