TM 5-3805-296-23-1
0024
Table 1. 0168 System Voltage Diagnostic Codes Continued.
024
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
0168-01 Electrical System
Test Step 6. Verify if Code is Still
Voltage Low Continued
Active.
1. Ensure all harness connectors are
connected.
2. Turn battery disconnect switch to
ON position and start engine
(TM 5-3805-296-10).
168-1 Electrical System Voltage Low
3. At MSD, check for active
Becomes Inactive Troubleshooting
diagnostic code 0168-01 Electrical
System Voltage Low (WP 0008).
complete. Proceed to step 4.
168-1 Electrical System Voltage Low
Remains Active Proceed to Test Step
7.
4. Install splash shield
(Figure 3, Item 4), four bushings
(Figure 3, Item 3), washers
(Figure 3, Item 2), and bolts
(Figure 3, Item 1) on machine.
Figure 3. Splash Shield and Retaining Hardware.
0024
5. Install left frame access plate
(WP 0376).
6. Install crankcase guard
(WP 0374).