8
9
1
9
8
5
TM 9-4940-568-34
7-50
7-6. PISTONS, CONNECTING RODS, AND BEARINGS REPLACEMENT (CONT).
The four digit number stamped
on connecting rod (8) and
connecting rod cap (1) at parting
line must match and be installed
on lubricating oil cooler side of
engine.
(23)
Install connecting rod cap (1) and two
connecting rod screws (9) to connecting
rod (8).
(24)
Alternately tighten two connecting rod
screws (9) per instructions below.
Step
Torque Value
1
26 lb-ft (35 N.m)
2
51 lb-ft (70 N.m)
3
73 lb-ft (100 N.m)
NOTE
Do not measure clearance
between connecting rod cap and
crankshaft.
(25)
Measure side clearance between
connecting rod (8) and crankshaft (5).
Side Clearance Limits
.004 to .013 in.
(0.10 to 0.33 mm)
