1
2
11
1
9
11
10
TM 9-4940-568-34
7-54
7-7. CAMSHAFT AND VALVE TAPPETS REPLACEMENT (CONT).
(8)
Remove the camshaft gear (9) and camshaft
(10).
(9)
Insert the plastic trough (11) to the full
length of the cam bore.
NOTE
Make sure the plastic trough is
positioned so it will catch the
tappet when the wooden dowel is
removed.
Only remove one tappet at a time.
(10)
Remove rubber band from two wooden
dowels (1) and secure the tappet not to be
removed with the rubber band.
(11)
Pull the wooden dowel (1) from tappet bore
allowing tappet (2) to fall into the plastic
trough (11).
