TM 9-4940-568-34
6-24
6-6.
SWING DRIVE ASSEMBLY REPAIR (Continued)
(17) Remove inner planetary assembly (26)
from swing drive assembly (2).
(18) Drive roll pin (27) into pin (28).
(19) Remove pin (28), gear (29), and two
spacers (30).
(20) Remove roll pin (27) from pin (28).
Discard roll pin.
CAUTION
Handle bearing with care or
individual needles may be lost.
(21) Remove bearing (31) from gear (29).
(22) Repeat steps (18 thru 21) for other two
assemblies.
(23) Remove center spacer (32) from carrier
(33).
(24) Matchmark and remove ring gear (34)
and preformed packing (35) from hub
(36). Discard preformed packing (35).
(25) Bend down tine of lockwasher (37).
(26) Position shaft (38) in soft jawed vise.
(27) Remove nut (39) and lockwasher (37).
Discard nut and lockwasher.
(28) Remove shaft (38) from vise.
