TM 9-4940-568-34
6-25
(29) Turn hub (36) over and remove gear
(40).
(30) Remove seal (41) from hub (36).
Discard seal.
(31) Position hub (36) in press.
(32) Press shaft (38) and bearing (42) from
hub (36).
(33) Remove hub (36) from press.
(34) Position shaft (38) in press.
(35) Press bearing (42) from shaft (38).
(36) Remove shaft (38) from press.
(37) Remove bearing (43), race (44) and
(45), and spacer (46) from hub (36).
b. Cleaning/Inspection
(1) Clean all parts.
(2) Inspect all parts.
(3) Replace all parts failing inspection.
c. Assembly
NOTE
Lubricate all preformed packings
and seal with clean hydraulic oil.
(1) Apply thin coat of grease to race (45)
and install race (45 and 44) and spacer
(46) in hub (36).
