TM 9-4940-568-34
3-97
(3) Disconnect hydraulic hose (4) from
check valve (5).
(4) Disconnect two hydraulic hoses (6) from
fittings (7).
(5) Remove nut (8), lockwasher (9), washer
(10), clamp (11) and tension load cell
cable (12) from boom stud (13). Discard
lockwasher.
(6) Remove clamp (11) from cable (12).
(7) Remove allen head screw (14) and stop
block (15) from boom brace (16).
(8) Remove jam nut (17) from tension load
cell (18).
(9) Loosen rear swivel nut (19) until flush
with rear end of tension load cell (18).
To
prevent
personal
injury,
extreme care must be taken to
properly handle heavy overhead
objects. Make sure all slings and
straps are safe to use and are
secured properly. Make sure there
are no obstacles in the way. Keep
clear of all suspended loads.
WARNING
(10) With help from assistant, attach lifting
device to hoist assembly (20) and lift up
on hoist assembly (20).
(11) With help from assistant, remove front
swivel nut (21) from front of tension load
cell (18).
(12) Lower hoist assembly (20) away from
tension load cell (18).
