TM 9-2330-389-14&P
4-22. FRAME GROUP MAINTENANCE (Con't).
3.
Remove capscrew (9) and adjustment bolt (10) from frame group (5).
4.
Loosen four self-locking nuts (11) on four capscrews (12). Remove four capscrews (12) and self-locking nuts (11)
from frame group (5). Remove self-locking nuts (11) from capscrews (12). Discard self-locking nuts.
5.
Remove hub cap (13) from frame group (5).
6.
Remove nut (14) and retainer plate (15) from cross axle (16) and frame group (5).
7.
With help of an assistant, slide frame group (5) off cross axle (16).
8.
Remove plain encased seal (17) from frame group (5). Discard plain encased seal.
b.
DISASSEMBLY
1.
Slide rear frame assembly (18) out of front frame assembly (19).
2.
Remove self-locking nut (20) from capscrew (21). Discard self-locking nut.
3.
Remove lubrication fitting (22) and pipe plug (23) from frame group (5).
c.
CLEANING AND INSPECTION
WARNING
Dry cleaning solvent P-D-680 is toxic and flammable. Always wear protective
goggles and gloves, and use only in a well-ventilated area. Avoid contact with
skin, eyes, and clothes, and DO NOT breathe vapors. DO NOT use near open flame
or excessive heat. The solvent's flash point is 100° F-138° F (38° C-59° C). If you
become dizzy while using cleaning solvent, immediately get fresh air and medical
help. If solvent contacts eyes, immediately wash your eyes and get medical aid.
4-18
