TM 9-2330-238-14
4-16. INTERVEHICULAR CABLE RECEPTACLE REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Materiais/Parts:
l Towing vehicle intervehicular cable disconnected
from semitrailer (para 2-11).
l Solder (Item 13, Appendix E)
l Marker tags (Item 15, Appendix E)
Tools/Test Equipment:
l Electrical tape (Item 17, Appendix E)
l General mechanic’s tool kit
l Four Iockwashers
. Soldering gun
a.
REMOVAL
1.
Remove four screws (5), nuts (1), and lockwash-
ers (2) from cover (4) and chassis frame (7).
Discard Iockwashers. Tag ground wire.
2.
Remove cover (4) from receptacle (3).
3.
Disassemble receptacle connector (3). Tag and
unsolder wires (6).
b.
INSTALLATION
1.
Solder wires (6) to receptacle connector (3) and remove tags.
2.
Wrap exposed wires with electrical tape.
3.
Position cover (4) and receptacle connector (3) in recess and install three screws (5), new Iockwashers (2), and
nuts (l).
4.
Install ground wire and remaining screw (5), new Iockwasher (2), and nut (1). Discard tags.
FOLLOW-ON TASKS:
l Connect towing vehicle intervehicular cable to semitrailer (para 2-10).
T A 7 0 1 9 3 7
4-22
