TM 9-2330-238-14
4-15. SWITCHES AND SERVICE RECEPTACLES REPLACEMENT (Con’t).
d .
CIRCUIT SWITCH INSTALLATION
1.
Install wires (3) on circuit switch (5) and tighten three screws (4). Remove tags.
2.
Install circuit switch (5) in box (6) and install two screws (9).
3.
Position cover plate (1) in place on circuit switch (5) and install three screws (2).
e.
BLACKOUT CIRCUIT AND EMERGENCY LIGHT SWITCH REMOVAL
1.
Remove two screws (12) and cover plate (11) from switch (14).
2.
Remove two screws (17) and switch (14) from box (15).
3.
Loosen three screws (13) and remove wires (16) from switch (14). Tag wires.
f.
BLACKOUT CIRCUIT AND EMERGENCY LIGHT SWITCH INSTALLATION
1.
Install wires (16) on switch (14) and tighten three screws (13). Remove tags.
2.
Install switch (14) in box (15), with OFF position facing down, and install two screws (17).
3.
Position cover plate (11) in place on switch (14) and install two screws (12),
FOLLOW-ON TASKS:
. Connect external power supply cable.
TA701936
4-21
