TM 5-3825-230-14&P
5-23. ROCKER ARM ASSEMBLY REPLACEMENT (CONT).
b.
Installation.
NOTE
Right rocker arm does not have a
shim.
(1)
Install two shims (8), plate (7), two nuts
(6), and two screws (9) on rocker arm (10)
using a 11 mm open end wrench.
(2)
Install lubrication tube (11). and align it in
lubrication pin (3).
(3)
Install rocker arms (4) on lubrication pin
(3).
(4)
Ensure that rocker arm assembly (4)
aligns with push rods and install two
screws (1) and two washers (2) in
lubrication pin (3) using a 6 mm hex head
wrench.
(5)
Install rocker assembly (4) onto head (5).
Tighten two screws (1) 66 to 72 lb-in (7.4 to 8.1 N•m)
using a torque wrench and 6 mm hex head socket.
NOTE
· Follow-on maintenance:
· Reset valve clearance (para 5-25)
· Install fuel injector lines (para 4-45)
· Install rocker arm covers (para 4-28)
END OF TASK
5-50
