TM 5-3825-230-14&P
b.
Cleaning/lnspection . Inspect cover for cracks and warping sufficient to cause leaks. Replace if damaged.
c. Assembly.
(1)
Install pin (8) and lever (9) on pin (2).
(2)
Install spring (5), ball (4), seal (3), pin (2), and screw (1) on cover (12) using a 4 mm hex head wrench.
(3)
Install washer (7) and screw (6) using a 17 mm open end wrench.
(4)
If removed, install O-ring (10) and cap (11).
NOTE
Follow-on Maintenance: Install rocker arm cover (para 4-28)
END OF TASK
5-47
