TM 5-3825-230-14&P
(8)
Attach dial indicator to connecting rod as
shown and inspect connecting pin for side
play. Value should not exceed 0.0019 in.
(0.05 mm).
c. Assembly.
(1)
Coat upper bushing (5) with engine oil and
install into connecting rod (4) using a
press.
(2)
Install piston (2) on connecting rod (4).
(3)
Coat wrist pin bore in piston (2) with clean
engine oil.
(4)
Coat wrist pin (3) with clean engine oil
and install in piston (2) and connecting
rod (4).
(5)
Install two retaining rings (1) into wrist pin
bore in piston (2) using snap ring pliers.
(6)
Coat lower bearing half (7) with engine oil
and install on lower part of connecting rod
(8).
NOTE
Follow-on
maintenance:
Install
engine cylinder (para 5-9)
END OF TASK
5-45
