TM 5-3825-230-14&P
NOTE
· Shims are on left rocker arm only.
· Rocker arms on flywheel side of pins
will not have plate.
(3)
Remove two nuts (6), plate (7), two shims
(8), and two screws (9) from rocker arm
(10) using a 11 mm open end wrench.
(4)
Remove rocker arm (10) from lubrication
pin (3).
(5)
Remove
lubrication
tube
(11)
from
lubrication pin (3).
(6)
Measure the OD of lubrication pin (3), and
ID of rocker arm (10). If difference
exceeds 0.03937 (1 mm) replace parts.
5-49