TM 5-3825-230-14&P
d. Cylinder Hose Replacement.
(1)
Removal.
(a)
Remove coupling (1) using a 9/16 in.
open end wrench and remove cylinder
hose (2).
(b)
Remove fitting (3) using a 1/2 in. open
end wrench.
(c)
Remove hose coupling (4) using a 9/16
open end wrench.
(d)
Remove restrictor (5), straight adapter (6),
and pipe nipple (7) using a 11/16 in. open
end wrench and pliers.
(2)
Installation.
Adhesives, solvents, and sealing compounds can
burn easily, can give off harmful vapors, and are
harmful to skin and clothing. To avoid injury or
death, keep away from open fire and use in a well
ventilated area. If adhesive, solvent, or sealing
compound
gets
on
skin
or
clothing,
wash
immediately with soap and water.
(a)
Apply pipe thread sealing compound to
threads of pipe nipple (7).
(b)
Install pipe nipple (7), adapter (6), and
restrictor fitting (5) using a 11/16 open
end wrench and pliers.
(c)
Install hose (2), and coupling (4). Tighten
using a 9/16 in. open end wrench.
(d)
Install fitting (3) using a 1/2 in. open end
wrench.
(e)
Install hose (2), and coupling (1). Tighten
using a 9/16 in. open end wrench.
4-189
