TM 5-3825-230-14&P
b. Motor Inlet Hose Replacement.
(1)
Removal.
(a)
Loosen couplings (1) using a 1-1/4 in.
open end wrench and remove hose (2)
from fittings (3 and 4).
(b)
Remove fittings (3 and 4) using a 1-1/4 in.
and 1-1/8 in. open end wrenches.
(c)
Remove nut (5), and clamp assembly (6)
using a ratchet and 7/16 in. socket.
Remove plastic ties (7).
(d)
Remove O-rings (8 and 9) from fittings (3
and 4).
(2)
Installation.
(a)
Install 0-rings (8 and 9) on fittings (3 and
4).
(b)
Install fittings (3 and 4) using a 1-1/4 in.
and 1-1/8 in. open end wrench.
(c)
Secure hose (2) to fittings (3 and 4) using
couplings (1). Tighten using a 1-1/4 in.
open end wrench.
(d)
Install clamp (6), and locknut (5) on hose
(2) using a ratchet and 7/16 in. socket.
Install plastic ties (7), as needed.
4-187
