TM 5-3825-230-14&P
4-105. HYDRAULIC HOSE ASSEMBLY
REPLACEMENT/REPAIR (CONT).
c. Motor Outlet Hose Replacement.
(1)
Removal.
(a)
Remove two clamps (1), and plastic ties
(2), and pull hose (3) off insert beads (4
and 5).
(b)
Remove nut (6), clamp assembly (7), and
hose (3) using a ratchet and 7/16 in.
socket.
(c)
Remove insert bead (4) using a 1-1/8 in.
open end wrench.
(d)
Remove insert bead (5) using a 1 in. open
end wrench.
(e)
Remove O-ring (8) from insert bead (5).
(2)
Installation.
(a)
Install O-ring (8) on insert bead (5).
(b)
Install insert bead (5) using a 1 in. Open
end wrench.
(b)
Install insert bead (4) using a 1-1/8 in.
open end wrench.
(c)
Install hose (3) using clamp assembly (7),
nut (6), and clamps (1). Tighten using a
ratchet and 7/16 in. socket.
(d)
Install plastic ties (2), as needed.
4-188
