TM 5-3825-230-14&P
d.
Installation.
(1)
Install spacer (16) on mounting bracket (12).
(2)
Install mounting bracket (12) on engine (15)
using two lockwashers (14) and screws (13).
Tighten using a ratchet and 1/2 in. socket.
(3)
Align alternator (4) on mounting bracket (12)
and install locknut (11) finger tight.
(4)
Install washer (10), lockwasher (9), and screw
(8) finger tight.
NOTE
Ground wire to engine is connected to terminal marked BAT- on alternator. Main harness wire is
connected to terminal marked BAT+ on alternator.
(5)
Install main harness wire (7), washer (6), and nut (5) on alternator (4) using a 7/16 in. open end wrench.
(6)
Install ground wire (3), washer (2), and nut (1) on alternator (4) using a 7/16 in. open end wrench.
4-85
