TM 5-3825-230-14&P
4-58.
STARTER REPLACEMENT (CONT).
b.
Installation.
(1)
Position starter (9) and install two lockwashers (8) and two screws (7) using a 8 mm hex head wrench.
(2)
Install three wires (3), lockwasher (2), and nut (1) using a 13 mm open end wrench.
(3)
Install wire (6), starwasher (5), and screw (4) using a flat tip screwdriver.
NOTE
Follow-on maintenance:
•
Connect battery cables (para 4-73)
•
Install left noise shroud (para 4-55)
END OF TASK
4-88
