TM 5-3825-230-14&P
c.
Left Shroud.
(1)
Remove left shroud (12) as follows:.
(a)
Remove three screws (13) using a cross tip screwdriver.
(b)
Remove screw (14) and washer (15) using a ratchet, extension and 13 mm socket.
(c)
Remove left shroud (12).
(d)
Remove spacer (16) from left shroud (12).
(2)
Install left shroud (12) as follows:.
(a)
Install spacer (16) in left shroud (12).
(b)
Position left shroud (12) and install screw (14) and washer (15) using a ratchet, extension and 13 mm
socket.
(c)
Install three screws (13) using a cross tip screwdriver.
d.
Rear Shroud.
(1)
Remove rear shroud (17) as follows:
(a)
Remove vapor separator (para 4-38).
(b)
Remove two screws (18) using a cross tip screwdriver.
(c)
Remove screw (19) and lockwasher (20) using a ratchet and 10 mm socket.
(d)
Remove rear shroud (17).
(2)
Install rear shroud (17) as follows:
(a)
Position rear shroud (17) and install screw (19) and lockwasher (20) using a ratchet and 10 mm socket.
(b)
Install two screws (18) using a cross tip screwdriver.
(c)
Install vapor separator (para 4-38).
NOTE
Follow-on maintenance:
•
Install rear and top panels (para 4-98)
•
Install left and right access covers (para 3-5)
END OF TASK
4-81
