TM 5-3805-296-23-6
0397
REMOVAL CONTINUED
12. Remove O-ring (Figure 6, Item 1) from secondary steering gear pump (Figure 6, Item 2). Discard O-ring.
13. Remove four bolts (Figure 6, Item 4), adapter (Figure 6, Item 5), and O-ring (Figure 6, Item 3) from secondary
steering gear pump (Figure 6, Item 2). Discard O-ring.
Figure 6. O-ring.
0397
END OF TASK
CLEANING AND INSPECTION
000397
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0539).
END OF TASK
INSTALLATION
000397
1. Install new O-ring (Figure 6, Item 3), adapter (Figure 6, Item 5), and four bolts (Figure 6, Item 4) on
secondary steering gear pump (Figure 6, Item 2).
2. Install new O-ring (Figure 6, Item 1) on secondary steering gear pump (Figure 6, Item 2).
3. Install new O-ring (Figure 5, Item 5), adapter (Figure 5, Item 7), six washers (Figure 5, Item 3), and bolts
(Figure 5, Item 4) on machine.
4. Install shaft (Figure 5, Item 2) and sleeve (Figure 5, Item 1) on machine.
