TM 5-3805-296-23-6
0397
REMOVAL
000397
WARNING
Lubricating/hydraulic oils can be very slippery. Immediately wipe up any spills. Failure to
follow this warning may result in injury or death to personnel.
NOTE
Plug and cap all hydraulic hoses and fittings to prevent contamination.
Tag and mark all hoses to aid in installation.
Note routing of hoses for installation.
1. Loosen tube nut (Figure 1, Item 6) and remove hose (Figure 1, Item 7) and O-ring (Figure 1, Item 5)
from elbow fitting (Figure 1, Item 4). Discard O-ring.
NOTE
Note orientation of elbow fitting to aid in installation.
2. Loosen jam nut (Figure 1, Item 3) and remove elbow fitting (Figure 1, Item 4) and O-ring (Figure 1, Item 2) from
secondary steering gear pump (Figure 1, Item 1). Discard O-ring.
Figure 1. Hose and Fitting.
0397