TM 5-3805-296-23-6
0375
REMOVAL CONTINUED
6. Lower transmission guard assembly (Figure 4, Item 4) from machine (Figure 4, Item 5).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may result in injury or death to personnel.
NOTE
Top transmission guard weighs approximately 56 lb (25 kg).
Note size and location of bolts prior to removal to aid in installation.
7. Remove four nuts (Figure 4, Item 7), washers (Figure 4, Item 8), bolts (Figure 4, Item 1), washers
(Figure 4, Item 2), and top transmission guard (Figure 4, Item 3) from bottom transmission guard
(Figure 4, Item 6).
Figure 4. Top Rear Transmission Guard Mounting Bolts to Bottom Transmission Guard.
0375