TM 5-3805-296-23-6
0375
INSTALLATION CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may result in injury or death to personnel.
NOTE
Top transmission guard weighs approximately 56 lb (25 kg).
Install bolts as noted prior to removal.
3. Position top transmission guard (Figure 7, Item 3) on bottom transmission guard (Figure 7, Item 4).
4. Install four washers (Figure 7, Item 2), bolts (Figure 7, Item 1), washers (Figure 7, Item 6), nuts
(Figure 7, Item 5), and top transmission guard (Figure 7, Item 3) on bottom transmission guard
(Figure 7, Item 4). Do not tighten nuts.
Figure 7. Top Rear Transmission Guard Mounting Bolts to Bottom Transmission Guard.
0375