TM 5-3805-296-23-5
0363
INSTALLATION CONTINUED
2. Connect main cab wiring harness connector (Figure 2, Item 2) on scraper service brake pressure switch
connector (Figure 2, Item 3)
3. Install scraper service brake pressure switch connector (Figure 2, Item 3) on bracket (Figure 2, Item 4).
4. Install new tiedown strap (Figure 2, Item 8) on scraper service brake pressure switch (Figure 2, Item 1) and
main cab wiring harness (Figure 2, Item 7).
Figure 2. Scraper Service Brake Pressure Switch.
0363
5. Start engine and allow air pressure to build (TM 5-3805-296-10).
6. Apply parking brake (TM 5-3805-296-10).
7. Turn engine off (TM 5-3805-296-10).
END OF TASK
FOLLOW-ON TASKS
000363
1. Install left frame access plate (WP 0376).
2. Remove wheel chocks (WP 0454).
3. Verify correct operation of machine (TM 5-3805-296-10).
END OF TASK
END OF WORK PACKAGE
0363-5/(6 blank)