TM 5-3805-296-23-5
0363
REMOVAL
000363
WARNING
Wheels must remain chocked during entire procedure. Failure to follow this warning may
result in injury or death to personnel.
NOTE
Tag and mark wiring harness connector to aid in installation.
1. Disconnect main cab wiring harness connector (Figure 1, Item 2) from scraper service brake pressure
switch connector (Figure 1, Item 3).
2. Remove scraper service brake pressure switch connector (Figure 1, Item 3) from bracket (Figure 1, Item 4).
3. Remove tiedown strap (Figure 1, Item 8) from scraper service brake pressure switch (Figure 1, Item 1) and
main cab wiring harness (Figure 1, Item 7). Discard tiedown strap.
CAUTION
Plug and cap all air tubes and fittings to prevent contamination. Failure to follow this
caution may result in equipment damage.
4. Remove scraper service brake pressure switch (Figure 1, Item 1) from fitting (Figure 1, Item 5) on brake air
control valve (Figure 1, Item 6).
0363-2