TM 5-3805-296-23-5
0364
REMOVAL
000364
WARNING
Wheels must remain chocked during entire procedure. Failure to follow this warning may
result in injury or death to personnel.
NOTE
Tag and mark wiring harness connector to aid in installation.
1. Disconnect main cab wiring harness connector (Figure 1, Item 2) from tractor service brake pressure
switch connector (Figure 1, Item 3).
2. Remove tractor service brake pressure switch connector (Figure 1, Item 3) from bracket (Figure 1, Item 4).
3. Remove tiedown strap (Figure 1, Item 8) from tractor service brake pressure switch (Figure 1, Item 1) and main
cab wiring harness (Figure 1, Item 7). Discard tiedown strap.
CAUTION
Plug and cap all air tubes and fittings to prevent contamination. Failure to follow this
caution may result in equipment damage.
4. Remove tractor service brake pressure switch (Figure 1, Item 1) from fitting (Figure 1, Item 5) on brake air
control valve (Figure 1, Item 6).
0364-2