TM 5-3805-296-23-5
0350
INSTALLATION CONTINUED
NOTE
Install wiring harness as tagged and marked during removal.
9. Install new O-ring (Figure 8, Item 5) and ejector kickout switch (Figure 8, Item 4) on fitting (Figure 8, Item 8).
10. Install ejector kickout switch wiring harness connector (Figure 8, Item 3) on bracket (Figure 8, Item 6).
11. Connect machine wiring harness connector (Figure 8, Item 7) to ejector kickout switch wiring harness
connector (Figure 8, Item 3).
12. Install new tiedown strap (Figure 8, Item 1) on ejector kickout switch wiring harness (Figure 8, Item 2) and
ejector kickout switch (Figure 8, Item 4).
Figure 8. Ejector Kickout Switch.
0350
END OF TASK
FOLLOW-ON TASKS
000350
Verify correct operation of machine (TM 5-3805-296-10).
END OF TASK
END OF WORK PACKAGE
