TM 5-3805-296-23-5
0350
REMOVAL CONTINUED
5. Remove bolt (Figure 2, Item 4), washer (Figure 2, Item 1) and wiring harness bracket (Figure 2, Item 3) from
mounting boss (Figure 2, Item 2).
Figure 2. Wiring Harness Bracket.
0350
NOTE
Complete steps 6 through 12 if leaks are noted at fittings.
Note position of fittings to aid in installation.
6. Remove hydraulic hose (Figure 3, Item 4) from fitting (Figure 3, Item 2).
7. Loosen jam nut (Figure 3, Item 5), and remove fitting (Figure 3, Item 2) from fitting (Figure 3, Item 1).
8. Remove O-ring (Figure 3, Item 3) from fitting (Figure 3, Item 2). Discard O-ring.
Figure 3. Hydraulic Hose.
0350