TM 5-3805-296-23-5
0346
INSTALLATION CONTINUED
NOTE
Install wiring harness as tagged and marked during removal.
4. Install relay (Figure 4, Item 4), clamp (Figure 4, Item 3), bracket (Figure 4, Item 2), washer (Figure 4, Item 5),
and bolt (Figure 4, Item 6), on mounting boss (Figure 4, Item 7).
5. Connect push frame wing harness connector (Figure 4, Item 8) to scraper air pressure sensor connector
(Figure 4, Item 1).
Figure 4. Scraper Air Pressure Sensor Relay.
0346
6. Start engine and allow air pressure to build (TM 5-3805-296-10)
7. Apply parking brake (TM 5-3805-296-10).
8. Turn engine off (TM 5-3805-296-10).
END OF TASK
FOLLOW-ON TASKS
000346
1. Remove wheel chocks (WP 0454).
2. Verify correct operation of machine (TM 5-3805-296-10).
END OF TASK
END OF WORK PACKAGE
0346-5/(6 blank)