TM 5-3805-296-23-5
0347
REMOVAL CONTINUED
NOTE
Note routing of wiring harness to aid in installation.
Note location and orientation of P-clamp to aid in installation.
Tag and mark wiring harness connectors to aid in installation.
7. Disconnect wiring harness connector (Figure 4, Item 2) from fuel sending unit connector (Figure 4, Item 1).
8. Remove bolt (Figure 4, Item 7), washer (Figure 4, Item 8), and P-clamp (Figure 4, Item 3) from machine.
9. Remove P-clamp (Figure 4, Item 3) from wiring harness insulation (Figure 4, Item 5).
10. Remove identification tag (Figure 4, Item 4) from wiring harness insulation (Figure 4, Item 5).
11. Remove wiring harness insulation (Figure 4, Item 5) from wiring harness (Figure 4, Item 6).
Figure 4. P-clamp and Wiring Harness Insulation Near Fuel Sending Unit.
0347
