TM 5-3805-296-23-5
0345
INSTALLATION
000345
WARNING
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can
cause lung irritation. Contact with skin can cause dermatitis. Wear gloves and safety
goggles and use product in a well-ventilated area away from open flame. If ingested, keep
individual calm and seek medical attention. DO NOT induce vomiting. If contact with skin
or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW local policy and
ordinances. Failure to follow this warning may result in injury to personnel.
WARNING
Wheels must remain chocked during entire procedure. Failure to follow this warning may
result in injury or death to personnel.
NOTE
This procedure is for right rear brake actuator and slack adjuster. Follow same steps for
left rear brake actuator and slack adjuster.
1. Apply sealant to fitting (Figure 4, Item 2) and install fitting on brake actuator (Figure 4, Item 1).
2. Apply sealant to fitting (Figure 4, Item 3) and install fitting on brake actuator (Figure 4, Item 1).
Figure 4. Fittings.
0345
