TM 5-3805-296-23-5
0345
REMOVAL CONTINUED
1. Loosen tube nut (Figure 1, Item 3) and remove air hose (Figure 1, Item 4) from fitting
(Figure 1, Item 2).
2. Loosen tube nut (Figure 1, Item 6) and remove air hose (Figure 1, Item 5) from fitting (Figure 1, Item 7).
3. Remove cotter pin (Figure 1, Item 11) from pin (Figure 1, Item 10). Discard cotter pin.
4. Loosen lock bolt (Figure 1, Item 12) from slack adjuster (Figure 1, Item 14).
5. Loosen worm bolt (Figure 1, Item 13) and remove pin (Figure 1, Item 10) from brake acuator (Figure 1, Item 1)
and slack adjuster (Figure 1, Item 14).
6. Remove two nuts (Figure 1, Item 9) and washers (Figure 1, Item 8) from brake actuator (Figure 1, Item 1).
7. Remove brake actuator (Figure 1, Item 1) from machine.
Figure 1. Brake Actuator.
0345