TM 5-3805-296-23-5
0323
REMOVAL
000323
WARNING
Do not remove Hydraulic system hoses, tubes, or fittings unless engine is shut down and
hydraulic system pressure has been relieved. Tighten all connections before applying
pressure. Escaping hydraulic fluid under pressure can penetrate skin.
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before removing
any hydraulic fitting.
To prevent injury to personnel, wear protective eye covering and gloves.
Lubricating/hydraulic oils used in performance of maintenance can be very slippery.
Immediately wipe up any spills. Failure to follow this warning may result in injury to
personnel.
Failure to follow these warnings may result in injury or death to personnel.
1. Remove four bolts (Figure 1, Item 2), washers (Figure 1, Item 3), and bypass valve (Figure 1, Item 4)
from hydraulic tank (Figure 1, Item 1).
2. Remove O-ring (Figure 1, Item 5) from bypass valve (Figure 1, Item 4).
Figure 1. Bypass Valve.
0323