TM 5-3805-296-23-5
0315
REMOVAL
000315
NOTE
The following steps remove the right horn, repeat these steps to remove the left horn.
Tag and mark wiring harness connectors to aid in installation.
1. Disconnect wiring harness connector (Figure 1, Item 6) from horn (Figure 1, Item 1).
2. Remove nut (Figure 1, Item 3), bolt (Figure 1, Item 4), washer (Figure 1, Item 2), P-clamp (Figure 1, Item 5),
and horn (Figure 1, Item 1) from machine.
Figure 1. Horn and Hardware.
0315
END OF TASK
CLEANING AND INSPECTION
000315
1. Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0539).
2. Clean and inspect all components IAW Electrical General Maintenance Instructions (WP 0540).
END OF TASK