TM 5-3805-296-23-5
0314
INSTALLATION
000314
WARNING
Tighten all connections before applying pressure. Escaping hydraulic fluid under pressure
can penetrate skin.
To prevent injury to personnel, wear protective eye covering and gloves.
Lubricating/hydraulic oils used in performance of maintenance can be very slippery.
Immediately wipe up any spills. Failure to follow this warning may result in injury to
personnel.
Failure to follow these warnings may result in injury or death to personnel.
NOTE
Use a container to catch any fluid that may drain from hoses or system. Dispose of fluid
IAW local policy and ordinances. Ensure all spills are cleaned up.
1. Install new O-ring (Figure 4, Item 1) on hydraulic temp sensor (Figure 4, Item 2).
Figure 4. Hydraulic Temp Sensor O-ring.
0314
