2
TM 5-3805-296-23-5
FIELD MAINTENANCE
-
HYDRAULIC PILOT OIL FILTER REPLACEMENT
031
6
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
References
Tools and Special Tools
0
0
Tool Kit, General Mechanic's
(WP 0539)
0
(WP 0550, Item 181)
0
Equipment Conditions
0
Gloves, Rubber (WP 0550, Item 74)
0
Machine parked (TM 5-3805-296-10)
Pan, Drain (WP 0550, Item 118)
0
0
Hydraulic system pressure released
Goggles, BII Item (TM 5-3805-296-10)
0
0
Materials/Parts
0
Drawings Required
0
Rag, Wiping (WP 0549, Item 28)
0
RPSTL Figure 89
0
Filter, oil, 1261814 (WP 0551, Item 18)
0
O-ring, 1038236 (WP 0551, Item 10)
Estimated Time to Complete
0
0
0.6 hr
0
REMOVAL
000316
WARNING
Allow hydraulic system to cool before performing procedure. Hot hydraulic fluid can cause
severe burns. Wear eye, hand, and skin protection when working with heated parts.
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury or death to personnel.
1. Remove hydraulic oil pilot filter (Figure 1, Item 2) and O-ring (Figure 1, Item 3) from hydraulic oil pilot
filter housing (Figure 1, Item 1). Discard O-ring and hydraulic oil pilot filter.
Figure 1. Hydraulic Pilot Oil Filter.
0316