TM 5-3805-296-23-5
0310
WARNING
Make sure battery disconnect switch is in OFF position before replacing starter cables.
Failure to follow this warning may result in injury or death to personnel or damage to
equipment.
RIGHT STARTER POSITIVE CABLE REMOVAL
000310
1. Remove muffler (WP 0205).
NOTE
Note cable routing to aid in installation.
2. Remove bolt (Figure 1, Item 1), washer (Figure 1, Item 2), and P-clamp (Figure 1, Item 3) from boss
(Figure 1, Item 4).
3. Position right starter cable (Figure 1, Item 5) aside.
Figure 1. Right Starter Cable P-clamp at Frame by Junction Block.
0310
