TM 5-3805-296-23-5
0292
REMOVAL
000292
NOTE
The procedures for left and right final drive assembly removal and installation are
identical. Left final drive assembly is shown in this procedure.
1. Start engine and release brakes (TM 5-3805-296-10).
2. Stop engine (TM 5-3805-296-10).
3. Loosen bolt (Figure 1, Item 1) on slack adjuster (Figure 1, Item 3) three full turns.
4. Loosen slack adjust bolt (Figure 1, Item 2) on slack adjuster (Figure 1, Item 3) until bolt does not turn.
5. Engage brakes (TM 5-3805-296-10).
Figure 1. Slack Adjuster.
0292