TM 5-3805-296-23-5
0291
INSTALLATION
000291
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Failure to follow this warning may result in injury or death to
personnel.
NOTE
This procedure removes one front axle shaft. Repeat this procedure to install remaining
axle shaft.
Axle shaft weighs approximately 95 lb (43 kg).
1. Install eye bolt (Figure 3, Item 1) on front axle shaft (Figure 3, Item 2).
2. With assistance, install front axle shaft (Figure 3, Item 2) on machine.
3. Push down on outboard end of front axle shaft (Figure 3, Item 2) to engage axle splines on machine.
4. Install bushing (Figure 3, Item 5) on front axle shaft (Figure 3, Item 2).
5. Install gear (Figure 3, Item 3) on front axle shaft (Figure 3, Item 2).
6. Install snapring (Figure 3, Item 4) on front axle shaft (Figure 3, Item 2).
7. Remove eye bolt (Figure 3, Item 1) from front axle shaft (Figure 3, Item 2).
Figure 3. Front Axle Shaft.
0291
