TM 5-3805-296-23-4
0282
INSTALLATION CONTINUED
NOTE
Install fittings as noted during removal.
15. Install new O-ring (Figure 18, Item 11) and position bearing housing cover (Figure 18, Item 2) on bearing
housing (Figure 18, Item 1).
16. Turn gear (Figure 18, Item 8) to ensure teeth have properly aligned in bearing housing (Figure 18, Item 1).
CAUTION
Ensure gears are in alignment. Failure to follow this caution may result in damage to
bearing housing and bearing housing cover.
17. Evenly install nine washers (Figure 18, Item 4) and bolts (Figure 18, Item 3) on bearing housing cover
(Figure 18, Item 2).
18. Install new O-ring (Figure 18, Item 10) and fitting (Figure 18, Item 9) on bearing housing (Figure 18, Item 1).
19. Install new O-ring (Figure 18, Item 7), elbow fitting (Figure 18, Item 6), and jam nut (Figure 18, Item 5) on
bearing housing cover (Figure 18, Item 2).
Figure 18. Bearing Housing Cover.
0282
