TM 5-3805-296-23-4
0276
REMOVAL CONTINUED
NOTE
Cap and plug all lines and fittings to prevent fluid loss.
Note routing of hydraulic lines to aid in installation.
Mark and tag hydraulic lines to aid in installation
25. Remove two spacers (Figure 9, Item 1) from machine.
26. Remove two nuts (Figure 9, Item 6), washers (Figure 9, Item 7), and bracket (Figure 9, Item 5) from machine.
27. Loosen tube nut (Figure 9, Item 3) and remove line (Figure 9, Item 4) from fitting (Figure 9, Item 2).
28. Remove O-ring (Figure 9, Item 9) from fitting (Figure 9, Item 8). Discard O-ring.
29. Remove bracket (Figure 9, Item 5) and line (Figure 9, Item 4) from transmission. Position bracket and line
aside.
Figure 9. Top of Transmission.
0276